VENTS - Household fan with automatic louvers and increased flow VENTS Series MA Turbo Ф100 - VENTS100MAturbo-1
Voltage, V / 50Hz: 1*230V
Power, W: 20 W
Flow rate, m3/h: 128 m3/h
Pressure, Pa: 40 Pa
Noise level, dBA 3m: 37 dBA/3m
Protection class, IP: 24 IP
Warranty period, months: 36 months
Fan diameter, mm: 100 mm
Engine Type: Bushing
Axial
APPENDIX
• Permanent and or periodic ventilation of bathrooms, kitchens and other service rooms.
• Installation in a ventilation shaft or air duct.
• Dimensions compatible with 100, 125 or 150 mm air ducts.
DESIGN
• Modern design and aesthetic appearance.
• Body and fin are made of high quality ABS plastic, UV resistant.
• Intelligent blade design gives the fan high efficiency and long life.
• Equipped with automatic shutters preventing the back entry of air and insects.
• Protection class IP 24.
ENGINE
• Reliable low wattage motor.
• Designed for long-term maintenance-free operation.
• Built-in overheating protection.
APPENDIX
HAND:
• The fan is turned on by the light switch, it is not included in the set.
• The ROPE V key fan is not recommended for ceiling installation.
• Fan speed control is possible through a thyristor speed controller. Several fans can be connected to one controller.
AUTOMATICALLY:
• Through the electronic control unit BU-1-60. Delivered by separate order.
• From the timer T (allows the fan to work from 2 to 30 minutes after turning off the lights).
• Through the humidity sensor and the TN timer (if the humidity in the room rises to the level set by
potentiometer, the fan turns on automatically and continues to work until the normal level of humidity. After
shutdown by the humidity sensor, the operation of the fan continues until the time set by the timer.)
• Through the motion sensor and the TP timer (if the motion sensor detects motion, the fan is turned on
automatically and continues to work until the time set by the timer from 2 to 30 minutes.)
INSTALLATION
• The fan is mounted directly to the ventilation shaft or air duct
• Flexible air ducts are recommended in case the ventilation shaft is remote from the
assembly. The installation to the air duct is carried out by means of a bracket at the outlet of the fan.
• Wall mounting is done using dowels.
